The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1992 740 Relay issue?

A couple of things could be happening here, but check the 700/900 FAQ's.

The relays on the 700 series did not always have the best contact to the actual spade lugs in the sockets that make up the relay board. Solution was to remove the board, remove the spades from the sockets, clean the spades, resinsatll in the socket and make sure they were seated all the way to the front of the socket. Many skip the removal and cleaning part of the process and just push the female spades to the front of the socket. I personally would not do this because others have found faulty crips, detoriorated or broken wires from making too sharp a bend into the relay tray, etc.

That being said, there are two other possibilites; intermitent ground that is corrected by the "pushing" and a single relay, most likely the FI relay, that just needs a bit of jostling to get it going.

Try the first thing I mentione and see what happens. Then you can move on to other troubleshooting.

Onkel Udo






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.