The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Shoulder belts on a 145 140-160

posted by  b4_ford on  Fri Oct 2 18:51 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 22 02:10 CST 2010
[RELATED]

My '72 145 had lap belts in the back seat. However the holes for the vertical rods were there, covered by rubber grommets. I pulled belts from a 90's 245 and installed them in the back seat. I only had to drill a couple of holes to accommodate the reels. I will be replacing the front belts also, although that requires drilling a hole in the transmission tunnel.

My '72 is probably an early one as most that I have seen had shoulder belts in the back. Check and see if your '71 has grommets covering the vertical rod holes. If they aren't there, it might be pretty tricky to get shoulder belts installed in a safe manner.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.