The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Low oil pressure, engine rattle at startup 200 1984

Just some comments about low oil pressure, as I had never seen this problem/solution posted. In an older 240 I had trouble with engine overheating, and after changing everything in the heating circuit(radiator,thermostat,etc), I checked oil pressure and it was very low. Expected the worst, and dropped the oil pan and checked rod and crank bearings, and oil pump, and everything was fine. When I pulled the oil pump I noticed the Oil pump o-ring had partially failed(extruded out on one side), and the oil from the pump was mostly recirculating back to the oil pan, with resultant low oil flow going to the engine causing both a low measured oil pressure, and problems with overheating due to low oil flow to the engine.

Changed the oil pump o-ring, about 50cts at FCGroton, and everything worked fine.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.