The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Mount replacement 200 1993

posted by  berlis on  Mon Oct 19 13:50 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 15:40 CST 2014
[RELATED]

Just did a couple of '92 240's. I used a piece of 4x4 resting over the engine. Passed an eye-bolt through it and with a snap hook, latched onto the engine hoist at the thermostat. This supported the weight of the engine as I worked both mounts. The tricky part is getting the new mount in and the bolt holes to easily match up with the engine block. Here I used a bottle jack on one side to "tip" the engine enough to line up holes. I caught a side of the oilpan or any other off-center surface to manipulate the line-up as necessary. A bottle jack is small enough to not take up too much space and give me room to work under the car.

For the fun of Volvos,
Mike
--
'83 245 GLT, '92 245DL, '90 760 GLT






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.