The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Problem unscrewing AC fitting

Anybody run into a problem where the flare fitting assembly is frozen into a single part? The nut turns and the whole AC hose turns with it? The hose twists into a tightly knotted pretzel?

The AC hose with the 90-degree metal pipe flared fitting spun easily. The other
hose with the straight metal pipe + flared fitting (the one that reaches across the valve cover)will not let go of the nut.

I tried penetrating oil and tapping and pliers on the crimped part of the fitting but it won't give. Now that it is off the compressor I'll try heating it, too.

In retrospect, I suppose that I could have avoided twisting the hose if I'd
disconnected it from the accumulator end under the dash. But I stll can't get the nut to turn and that seems weird to me. It isn't supposed to be like this is it?

Any suggestions other than replacing the hose?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.