The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A temporary (?) OD relay bypass 200 1993

When you've found the OD relay, per Art's directions, you can do a temporary* diagnostic bypass with a jumper wire at the relay harness connector plug.
Just connect these two plug terminals together with a "jumper" wire:
• Input terminal #15 (2 wires, a Blue-Black and a Gray)
• Output terminal #87 (1 White wire)

A good-fitting jumper can be made with flat male crimp-on terminals that are the similar to the relay terminals. This jumper wire will simulate a relay that is always energized — which is the normal condition, until the shifter button is pressed.

* If the OD works OK with the bypass jumper (and you don't need the shifter button downshift option), you can just leave the jumper wire in place.

--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.