The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing an engine 200

I work slowly and it took me 6.5 to pull my engine alone. I spent another 15 hours detailing out all the little junk to do in there while you do it (things like clean the engine compartment, new seals and timing belt and tensioner, new water pump and hoses, thermostat, flame trap, check wires,etc.) and another 10 hrs to put it back together. A couple of tips come to mind: A digital camera as you tear it all apart is great to utilize, a Bentley manual with all the stuff photocopied so that when you spill a pint of power steering fluid over it you haven't ruined the whole book (don't ask me why I picked up this tip) and some masking tape and a sharpie for labeling hoses and other things that get reconnected somewhere. A box of quart and a box of gallon Glad freezer bags are nice for keeping nuts and bolts from different assemblies organized and seperated from one another.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.