The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Elring Rear Main Seal 900

I ordered an Elring Rear Main Seal from FCP Groton and was just reading the FAQs and found this:

Seal Choices: [Matt L./Rolyak] There are two rear seals available: one is 10mm thick (red: silicone) and the other (grey or brown: Viton) is 7mm. The more expensive Viton will last much longer than the silicone rubber material. The 10mm is stock and the 7mm is replacement.

Here is the seal URL at fcpgroton:
http://www.fcpgroton.com/product-exec/product_id/3806/nm/Volvo_940_8_Valve_Rear_Crankshaft_Seal_1991_1995_Elring_/category_id/125

Which seal will I be getting, silicone or Viton? Does anyone have experience with the Elring Rear Main Seals?

Thank you.
--
Mine: 2-940s, 3-740 and 1-940 parts cars, and 3 John Deere 630s, dtr1:3-940s, dtr2:2-740s






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.