|
Hello,
Posted in the wrong place the first time.
I am having a no start issue. I have read over most forums etc trying to find the cause. I have eliminated the pump. It spins when 12v is applied directly from the battery. I thought it was the pump relay because 87 was burnt and tried re-soldering ended up buying a new one but still not running. I have a spark. I have looked at the wiring diagrams but they do not seem to match the colors of my wires for the suppression relay. The wiring is original. I have two larger diameter wires and two smaller diameter wires. The small wires are as follows. Pin 2 is a blue and yellow wire. The other is a old red or brown. The larger wires are red and the other is gray. I believe the red is 30 as it has 12 V so it should be pin 4. If my logic is correct then the two wires I am not sure of have to be for pin 1 and 3? I see the caos is in the circuit for the pump as well. How to verify caos correct operation? What else may be preventing my pump from running? Ballast resister? Thanks in advance for any and all help
|