The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Temperature sensor resistance 140-160 1973

The sensor I had in it was from a '70 1800 B20. Seems like the resistance is different between the '70 and the '73 sensors.

FCP states that the '73-on temperature sensors are the same. I had a 240 sensor laying around, so I threw it in and seems to work fine on the B20.

Paul

BTW- I tested the 240 one I have in boiling water (at an altitude of 5280 ft - Denver [should be around 195*F]) and got 120 ohms, then checked the 140 temperature gauge using some resistors. 67 ohm resistor showed about 3/4 hot (just below the orange on the gauge), 135 ohm resistor showed about 1/3 hot on the gauge.

So I threw in the 240 temp sensor in 140 car and got the car warmed up. The sensor read about 170 ohms (wire not attached) and the temperature gauge was reading 1/3 hot (wire attached).

The '70 B20 temperature sensor that was on the car must be the wrong sensor. It reads in the 2.4K ohm range in boiling water.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.