The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Another no spark - all the usual suspects replaced already 200 1993

Art,
put everything back together and decided to start with the obd code check and I'm getting nothing. I tried the lead in slot 6 and pressed once - nothing. Onc section in Bentley says press twice so I tried that - no codes. Then I tried wiht the lead in slot 2 (fuel system checks) and again it gives no codes. Now I'm going out (when I dry out) to get to the ECU and verify power at pin 6 and ground at pin 20 and 14. Boxvolvo suggested the tach might be shorting out - I was all hot on that but now just seems the ECU is not on. Sounds like the old 25 amp fuse but 91 and on don't have that. All fuses are good and hot with key on so power is going out to ECU I suppose. Any other ideas apprecieated.
Robb






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.