The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

exhaust manifold broken stud on a "92 940 900 1992

I went out to PnP and found a head off a 93 that fit and changed it over. It took me about twelve hours or so- includes removing the head from the one car and cleanig it up changing the seals etc. the valves are like noew. the car ran lean, as there wasn't much in the way of carbon deposits on the valves.

I had to remove the head form the existing car (940) and clean it up- the water pump needed changing to as I found some damage to the inside. I replaced three of the injectors, I don't think they had been changed or serviced ever! The manifold on the exisitng car had two bolts that were stripped bu I didn't notice until i removed it fron the engine.

Cleaned the distributor but left the old timing belt on- it hasn't had many miles on it- I'll change it later-






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.