The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Do you need to replace fuel injector O rings? 200 1993

posted by  7 volvofamily on  Tue Feb 16 16:49 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 21 17:22 CST 2013
[RELATED]

Just be careful when you pull the fuel rail and injectors as a whole unit.

Then pull the metal clips from the injectors to the rail, pull the injector from the rail.

I like to crack the old tip just a pinch with needle nose pliers; this prevents damage the spacer you will be re-using. I like to spray the tip of the injector with carb cleaner and then brake clean to make sure they are some what clean.

Make sure you pick out all of the engine crud from the orifices. The crud will make it harder to seat the new seals and provide a poor seal.

I like to use a little grease on the o-rings before inserting the injector either into the fuel rail or the head.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.