The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A spacer ring in my future - not 120-130

John I think you're onto something. I measured the slot depth at the back of the fiber gear at .100" and the slot at the back of the steel gear at ~.090". The key appeared to be canted slightly upward at the back (and a mike job confirmed that) and there seems to some evidence of binding along its top at the back as well.

However before you take my measurements to the bank, I have a confession to make. I remeasured the thickness of the spacer ring and found it not to be the .143" I measured earlier but .159", essentially identical to what George Downs measured. I'm not sure how I managed to make that mistake, but clearly I did. So it appears I don't need a new ring - just a new eyeglass prescription.

So now I'm going to take a deep breath and dress the key-way in the steel gear ever so slightly, make sure the key is level front to back and try again.

Watch this space.

--
Barry '67 122S "Betty", '69 122S "Veronica"






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.