The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help rear pinion seal leak multiple times with Mobil 1 gear oil 900

93 940 with locking rear end 1041

I changed the gear lube and replaced it with Moblil 1 75-90 wt at 89K miles, then the pinion seal started leaking shortly afterwards 93K miles.

I then replace it at 93K miles and used Mobil 1. It then lasted until 178K miles. I replaced it again at 178K and put a speedy sleeve on and used Mobil 1 and now at 205K miles it is leaking again. The surface looked ok but I put the sleeve on just to be sure.

Do you think the Mobil 1 75-90 is too thin (book calls for 90wt or 80/90wt) which is causing the leak. It seems to leak most when it gets warm or after a long drive.

Any ideas on what to do next. Maybe 75-140 would be thicker when it gets warm which would prevent it from leaking out?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.