The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'75 Dizzy question 120-130

I picked up a complete '75 B20 electronic distributor for my '68 144. The distributor was turning tighter then I thought. I took it apart and cleaned the shaft and all is well now. The shaft was gummed a bit. Turns great now.

Can anyone tell me how this '75 dizzy shaft gets oiled? The end of the shaft under the cap has a screw in there with no felt. I can't see how engine oil would go up the shaft. My current distributor has a oil point where the felt is. I can't see how oil would get down to the shaft if I did put oil in there. It appears the top part of the shaft comes off if you take that screw out. I was going to take that off to have a closer look.

If you lube it and put together and not service until you take it apart again. What kind of oil or grease do you use.

Sorry, I thought I was posting in the 140-160. Had the wrong tab selected.

Craig






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.