The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Seized camshaft? 200 1989

If a gentle tug on the cambolt with wrench won't move it, it's seized from oil starvation. Pull a cam bearing cap off and you'll probably see some wear patterns from lack of oil. Not to worry though.
The blockage occurs in the head gasket in the cross over between the block oil hole and the number two cylinder head bolt hole, which feeds the gallery in the head. At least that's where the plug was in all of the B21's and B23's I repaired over the years. The B230 had a larger crossover, and didn't seem to experience this problem as much.
The head has to come off to remove the plug. Hone the cam bearing bores a bit with a wheel cylinder hone, and polish the bearing journals on the cam.
If you think the head doesn't have to come off, and that the blockages are elsewhere, then remove the t-belt and spin the intermediate shaft with speed handle or a drill, and watch for oil flow. There probably won't be any in the head.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.