The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Thermostat housing stud size? 200 1990

Was cleaning up under the hood of my '90 wagon last evening and found that the support bracket for the hose that runs from the AC compressor over the cam cover had broken due to 20 years of accumulated metal fatigue. After I drilled a new mount hole and rebent the support into shape, I went to mount it in the same location, on the LH bolt of the radiator thermostat housing. While tightening it down, I sheared off the top of the stud along with the flanged nut. (Good work, I know. )

As it was late last eve when I did this, I started the car up for a few minutes and looked for any leakage around the thermostat housing. Seeing none, I planned to purchase a new nut and stud this eve to fix the problem. That said, I did not pull the other stud out to get the proper size - so my question is, does anyone know the proper dimensions for the thermostat mounting studs?

Thanks,
Zach
Anchorage, Alaska
'88 244 & '90 245






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.