The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cheap fix for the connector on the oil pressure switch! 200 1986

This fix is for you folks with the crap wiring in the mid 80's and issues with oil pressure switch plug. My connector was chopped off when the dual sending unit took the old switches place. My dual unit has sprung a little leak and I had to put the old switch back in until the new one gets here and there is time to install it.

Took a blue crimp butt splice and that thing slips up on the sending unit like it was made to go there. 75 miles today and worked like a champ did not move in fact. If the fit was a little loose, you could just slightly crimp the butt splice to snug it up. The plain jane one on Inga fit nice and snug and beats having to go down the PUP just to chop off a plug.

Ready to get my oil pressure gauge back working, but better than nothing at all.

Regards,

Pai;






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.