The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need Help Removing Rear Flange from a M40 to Install New Gaskets 140-160

posted by  derek uk on  Tue Apr 20 23:58 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:33 CST 2014
[RELATED]

It's a bit late to say that the tools should suit the job. Get some 1/2" inch kit. 3/8" OK up to about 40ft/lbs max. Never use a ratchet to "break loose" a fully tightened nut/bolt. Ratchets are for convenience, getting the nut up to and from the snugged position, especially where access is difficult. Final torque with a wrench or fixed socket.
However, I'm guilty sometimes, aren't we all! I started with a 1/2" socket set and very rarely find the need to use 3/8", but it seems to be normal now with modern engines/cars to use 3/8" and then switch to 1/2" for heavier duty stuff.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.