The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Duett transmission mount setup question 444-544

Hi guys.
I'm wondering what my transmission mount and cross member/transmission support is supposed to look like? What's the correct set up for a 1958 Duett? It has the four speed M4.
When I put the new engine in, I went with what I had as far as the transmission mount because it was all I had, but I'm pretty sure it's not correct.
It's basically a piece of heavy angle iron (correct term?) mounted to the transmission with the two bolts and then it's bolted down through the cross member. It makes it so the transmission just rests on top of the cross member and This causes a lot of vibration. It looked as though something was hacked off of the top of the cross member.
I seem to remember a picture of a cross member/support on a similar year Duett that dipped down more in the middle than my cross member does.

Any help would be greatly appreciated.







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.