The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tranny mount gave out due to tranny leak at tail housing. How hard a repair is this? 200 1983

Hello again, folks. My daughter's beautiful black '83 wagon started groaning and spewing black smoke under the car. Turns out the tranny leaked fluid out onto the rear tranny mount, which in turn went mushy causing the tranny to drop a bit and put stress on the center shaft bearing and rubber housing. Black oil, black smoke, and a loud noise grinding noise forced my daughter to pull over into a Sheetz parking lot and I had it towed home. Now I know how to mark the shaft and remove it. How do I pull the bearing out and especially remove and replace the tail shaft bushing. The books don't seem to cover that part too well. I will likely have to remove and repair the center bearing and rubber mount. Mainly I do not know how to do the bushing. Thanks for any help. My daughter wants her wagon back and no other 240 will do. jg






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.