The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Check engine light. S90-V90

I don't know anything about these cars but here goes.

You have changed everything but the wire and its connector to the ECU. You may be getting some added resistance in between. Corrosion or possible funky copper strands.

Take a reading at The ECU by back probing while it is running with a fast digital voltmeter or a 0-2 LED sensor meter. It would be nice if you have a recording or data hold type meter.

You may try running your own wire around from the sensor output and make a separate ground back to the ECU to bypass a frame ground issue to eliminate that.

The time frame is too long between engine light reports to be a steady problem. this is, what makes me think it could be a wire communication problem.

Again, I'm just guessing on this car. Good luck.

Phil






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.