The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removing the rear pinion nut: size? Preload? 120-130

posted by  red92s on  Tue Jun 29 02:01 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 18 13:02 CST 2014
[RELATED]

Anyone know off the top of their head what size the nut holding the rear pinion is? I'm going to be attempting to change out the pinion seal this friday and would prefer to have all the proper tools and supplies close at hand before starting. I HATE extra trips to the store in the middle of a project.

Also, after reading up some up on the interweb, it sounds like for many rear ends you have to measure the bearing preload the nut is creating before taking it off (so you can tighten the nut to the same preload setting on reinstallation). I don't think I have seen refrence to doing this on the 122 in any of the manuals. Is it necessary?

Finally, and suggestions on scratch built drivers to put the new seal in?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.