The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Try this! 200 1992

This is the wiper motor and what I am about to describe, yeah I have the dang T Shirt.

Start by opening the top of the motor, remove the two phillips screws and take a look at the little copper contacts that are supposed to be held apart. Very easy to miss this when you have the cover off and accidentally press them together. That will cause the constant motor running you describe. The contacts are supposed to go on both sides of the center ring. Slip the connector back and then ease it forward so that the contacts are separated by the center plastic section. Slip the plastic back into place, ease the dog ears back into place and put the screws back in. If you have some lithium grease, a little spray never hurts when you have the top off.

See if that will solve your constant motor running problem.

Regards,

Paul






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.