The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Testing Regina ECU inputs from A/C 700 1990

Hi,
I'm struggling (still) with low idle speed when the transmission is in drive and the A/C is on. Off idle there is no problem, it's only a problem when at idle. The car idles steadily in this condition, just at too low a speed which makes the car chatter and somewhat uncomfortable for the passengers. Switching the car to park, or switching off the A/C compressor, eliminates the chatter, but it's a little bit much to constantly do this in stop-and-go traffic.

It looks like there are two inputs from the A/C to the Regina: 1) from the dashboard switch (to tell the ECU the A/C switch is on), and 2) from the compressor (to tell the ECU that the compressor is engaged).

Can the Mode-3 diagnostics in LH2.4 be used to test both inputs? Or just the former? It looks to me like "just the former".

Can input #2 possibly assert itself before the pulley is turning, i.e. the engine is running?

ed






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.