The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Lower Thermostat Housing Removal 900 1994

I had a stripped torx bolt while replacing the thermostat on my 960. I tried chiseling on the outside of the bolt to no avail. Drilling the head off the bolt freed it up and I thought I was good to go. But the hammer ruined the seal between the lower thermostat housing and the block.

Has anyone replaced this before who can tell me what I'm going to need to remove? I've got the two top-side torx bolts off but that lower one is tucked way in there. It looks like I definitely need to remove the serp belt and power steering pump. But from my vantage point I'm not even sure that will do it. Anyone with this experience have an answer?

If I have to take of the intake manifold I'm going to have to start limbering up to kick myself in the ass.

Thanks






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.