The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

93 940 w/ Regina keeps tripping Check Engine light for knock sensor code 143 900

My daughter's 1993 940 Non-turbo has the dreaded code 143 for "knock sensor signal absent or faulty." After clearing the code the light comes back on within two days. Checked the normal items listed here to no avail. Replaced the knock sensor with a new one from FCP Groton. Torqued the sensor bolt to 8 lb-ft with blue locktite. Cleaned the knock sensor connector with Deoxit. Pulled all the engine wire harness connectors at the firewall on the driver and passenger sides and cleaned with Deoxit. Keeps tripping code 143 ever couple of days.

Considering relocating the knock sensor wire harness away from the alternator wire harness but is this really a possible solution?

I think this explains why the previous owner pulled the check engine bulb from the dash.

Thanks for any advice.

Rob Ippolito
93 940 Volvo
90 740 Volvo GL Wagon






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.