The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 a/c compressor does not drain 200 1987

To prevent condensation draining to the interior floor pans, two conditions must be met:

1. the rubber evaporator drain line that goes from the evaporator housing through the transmission hump and out to the undercarriage, must be clear of debris

2. the various metallic hoses going to and from the evaporator must be insulated from exposure to ambient air (which contains moisture, which will then condense on the hoses and then fall to the floor/carpet/floorpan). In most bricks these hoses are covered with a putty or a black butyl substance. Volvo's AC retrofit kits come with rolls of butyl for this purpose. See this illustration:



Note that the expansion valve is NOT covered with butyl--do not insulate the expansion valve.

kourt
87 245
austin, tx






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.