The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

General Oxygen sensor question No Volvo content..

Ok, I understand the what you said now about the .46V and it makes sense, but I wanted to be sure the view was clear. The 1/2 volt you saw is deceivingly close to the value one might expect on the sensor's output lead, while connected to the ECU and not yet warm. But it could also represent the voltage developed across the wiring to wherever the Camaro's heater lead gets its ground return. In other words, the .46V says the heater is connected and drawing current. To double-check that, simply disconnect the heater's battery source, and that .46V should drop to nearly zero.

Now about the heater working key-on, I didn't know that it would. An LH2.4 Volvo needs to have the motor running (or cranking) to heat the sensor. No matter, though, the earlier Volvos' oxygen sensors got heated with key on.
--
Art Benstein near Baltimore

Acupuncture is a jab well done.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.