The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

You could make your own 200 1986

posted by  Trev29 on  Fri Aug 13 23:45 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 05:56 CST 2014
[RELATED]

You'll need a micrometer and exacto knife.

First take measurements. Then do the calculations to see what thickness of shims are required. Remove the discs and see if you can switch them around so that only a shim or two is required.

Then find some foil of suitable thickness (eg. in kitchen), cut it to size and place it under the disc(s) that needs thickening.

NOTE: in removing (and installing) the cam shaft, loosen (and tighten) bolts/nuts in a balanced way, else you may snap the shaft.
--
1980 245 Canadian B21A with SU carb but electronic ignition and M46 trans in Brampton, Ont.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.