The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bulb out Relay - Problem Solved 200 1993

Hello All,

Probably the last recommendation was the most apropo:

"so as a recommendation, check your work"

I checked grounds first per John, but that didn't solve the prob. Next, I swapped bulb and bulb holders from my other 93 sedan and that made all the difference.

Turns out that the bulb holder was the culprit. We had new and same make bulbs in the bulb holder but that didn't turn the bulb out indicator off, Fooling me was the fact that the taillights worked perfectly, but prob enough difference in resistance existed at the connection either with the bulb to bulb holder, or bulb holder to the circuit board which caused the activation of the bulb out sensor.

So.....if your bulb out sensor is on I suppose the protocol would be install new bulbs first. Then clean up the bulb holder, then check the sensor relay.

Thanks to Art, there's now archived some nifty troubleshooting pics.

Again, thanks to all that responded.

Marty






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.