The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

fiber washer material 120-130

posted by  greezy on  Mon Oct 25 12:13 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 4 21:21 CST 2011
[RELATED]

Got my heater motor apart, and I want to remake the fiber washer that goes forward of the commutator. It's square with an offset hole in the middle. Mine was baked and bent and...then I busted it in three pieces. Anybody know where to get material for making a fiber washer 1/16" thick?

I posted in another thread here about trying to take the plastic fan off this motor. It was a challenge. I ended up following the suggestion I got here from rogersvolvos to use a center punch. I cut the top and bottom out of a tomato can with a diameter similar to the fan, and used it as a sleeve. Then drove the motor down and out with a center punch. After a soak in PB Blaster.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.