The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Make my own clutch spring? 200 1981

I have a '78, '84 and '86 that use the spring because the factory specifications calls for free play in the throw of the clutch pedal.

The theory is to allow the throw out bearing to back away from the spring fingers that apply pressure to the disc.

I know they all have a piece of rubber for the cable to pivot in.

Now my '91 does away with most of that and added a large chunk of iron onto it. No play at the foot pedal, big chunk of iron?
Gets me!

I have often wondered how or why it is now OK to leave the throw out bearing to sit against it myself. The bearing and clutch are components are different but haven’t studied how the bearing doesn’t spin all the time.

Maybe someone can shed some light how this now is a good thing.

How does the newer style slightly larger diameter clutch work with less effort on the pedal yet using the same methodology overall?

Puzzled
Phil






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.