The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

spark plug wire holder(s) 200 1989

uid 2796's pic
posted by  bulletproof on  Fri Nov 26 12:34 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:02 CST 2014
[RELATED]

As Euroman points out, use the valve cover nuts. But leave the gasket out of the discussion. It's under the cover. Clips will be over.

For the '89, really the only place you need the single wire clip would be for the #4 wire and it is best placed under the nut second from the rear on the lower edge of the cover.

For the "comb", as it were, use the nut closest to the oil cap on the upper edge.

The other comb should be somewhere over the cover, wherever the wires begin to diverge. It just hangs there.

And the little maltese cross looking loom is about 6 or 8 inches from the distributor.
--
'80 DL 2 door, '89 DL Wagon






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.