The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

testing the charging system 200 1988

If you are doing what I think, you are doing. The meter is saying the cables are having a bad connections conniption, or are just bad inside them.

When using the meter in line with the one side of the battery post to their other connection point the voltmeter reading should be far less than 0.2 volts.

Anything higher means there is a large resistance. The 0.6 v is the bad cable. The 0.2 is not so good either and may be a reading related to his not so well connected or a well grounded cousin most of the time.

When checking charging voltage the voltage should be at least one volt above the rested voltage on the battery. With the car running, the meter should hold 13.2v to 14.2v across the posts. The average varies with the accessories loading and the total conditional charge of the battery.

The bad connections affect the feedback to the alternator/regulator system. This controls output of current within those voltage ranges.

Phil






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.