The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No gauges, no charging, no cold weather. 200 1990

The problem is in the circuit board of the cluster. There are good write ups on how to fix in the FAQs for the 700 series. Turbobricks also has a good right up as well. The best way to check for your problems is to remove the cluster when cold and use an ohm meter to check for any open circuits. Do one pin at a time and then mark the pin once checked to the end of circuit. I have found that most of the breaks happen to the left and right of the speedo. If you do not find any breaks, then I would resolder all the joints at crossovers and pins. Good luck and post with your findings. Pauli






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.