The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

high idle upon start, then falls and hunts. AMM? 200 1991

Can you swap in a known-good Idle Air Control? The IAC would be my first suspect.

Its location is close enough to the block to get some warming as the engine heats up, and that may loosen up sticky residue inside it.

Older cars with carburetors and accelerator pumps benefit from pumping the gas pedal on a cold-morning start. With FI engines one runs the risk of having too much fuel from multiple start attempts, which must burn off after the engine starts. It can run rough from a too-rich mixture during that time.

If the check valve in the fuel line is failing, the fuel delivery system can lose pressure overnight. In that case it is necessary to turn the key on and off several times to pump up the fuel to the needed pressure.

Hope this helps.

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.