The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Found my vacuum leak, but now sure why more things were affected......... 200 1986

"What does the vacuum connection to the FPR affect, higher engine loads?"

The vacuum connection affects the FPR at all engine loads.

At idle, the vacuum is at it's highest, and the FPR regulates the LH 2.0/2.2 pressure to about 26.2 psi. At maximum load (Wide Open Throttle), the FPR "feels" atmospheric pressure and raises fuel pressure by about 9 psi to 36.2 psi. The higher LH 2.4 pressure ranges between 34.5 and 43.5 psi.

Running with the vacuum hose detached as you were, would result in higher fuel pressure. And the open vac hose would be seen by the O2 sensor as a significant vacuum leak, and reported to the ECU. So the net result be rich running due 1) the higher fuel pressure, and 2) ECU response to the "lean mixture" seen by the O2 sensor.

See Bentley page 241-9 for LH fuel pressure testing and specifications.


--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.