The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Just a bit off topic 200 1980

It's a bit of a feel thing, but when moving the piston in with a lever, one backs off the force and the piston should be observed to move out a small amount due to the distortion of the seal.

You've put in a few words a concept I think needs to be taken into account when rebuilding (or as most of us do, replacing) calipers: "distortion of the seal."

This little bit of spring-back, combined with new rubberized shims, if factory type, multiplies backward to the pedal feel by the hydraulic advantage to result in uncounted numbers of posts lamenting "spongy brakes" after the job.

After sorting out just "how spongy" and eliminating the mismatched caliper rebuilds, ruined masters, and bleeding mistakes, there are still some dissatisfied with the lack of the hard pedal their stiff-sealed 30-year-old caliper pots provided. There's no substitute for experience.


--
Art Benstein near Baltimore

If flying is so safe, why do they call the airport the terminal?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.