The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Some questions about using b234 injection parts on LH3.1 b230f 200 1991

posted by  anderssj on  Sun Jan 16 15:54 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:03 CST 2014
[RELATED]

I was lucky enough to find a non-running 91 245 (LH3.1 and M47, 130K miles) recently and was able to pick it up pretty reasonably. Now that it's running again and I've taken care of some of the easy improvements (IPD bars, euro lights, new brakes and exhaust, etc.), I'm thinking of making some modifications to the injection system.

I'd read a while back that vvpete used some b234 parts on his 91 wagon with good results. As I understand it, he put in the white topped injectors from a b234, along with the matching fuel pressure regulator, ignition controller (EZK PN?), and coil.

I ran across a "fresh" '91 b234 at our local PnP and was thinking of doing some "shopping" tomorrow since the base is closed. That car was damaged on the passenger side--probably an accident in our recent snow storm--but everything under the hood looks good. Are there any other parts I should pull while I'm there? Will I need the wire from the coil to the distributor? IIRC, the coil on the b234 has a pin in the center of the cap.

When it comes time to install the parts, are there any modifications I will need to make to the ICU (or wiring, or others), or is it pretty much remove and replace?

I tried contacting vvpete through the e-mail function on the bboard, but got a failure (probably user error on my part).

Any advice, insights, BDTDs would be GREATLY appreciated!

Thanks in advance!

Steve Anderson
"anderssj"





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.