The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

brake fail 120-130

The reason the clevis pin dropped out was the failure of the the split pin and and it's disappearance. Definately one where the instruction "always fit a new split pin" should be followed. Can happen on the clutch as well. The holes in the clevis wear oval which gives too much movement in the pedal before anything happens. The position can be adjusted on the push rod. The clutch clevis wears the worst and AFAIK they are NLA. I'm in the UK but will buy a couple of sets for brake and clutch from "anywhere" if they are available. Must be the correct ones though. You can lose close on 1 1/2" at the clutch pedal when the wear is bad which makes the the clutch action short and very unpredictable. Currently I've got mine adjusted out to the limit and it's OK but it needs changing to a new or better one.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.