The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Horn Wire 120-130

posted by  malloy1 on  Sat Mar 26 23:36 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 17:44 CST 2014
[RELATED]

OK-I replaced my steering coupler today, and that the stupid horn wire is feed through the center of the coupler. I didn't want to cut it on the steering wheel side and have a splice inside of the rods. So, I cut it where the horn wire connects to the two wires near the radiator, and pulled through the steering wheel.

So, to get the wire feed back through the rods, I feed a thin wire through the little hole at the end of the steering box through to the steering wheel, and soldered the wire to the horn wire and it pulled right through. I only clip off about a 1/8" of the horn wire to get the soldered end off.

Any other ways of doing it?

Paul






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.