The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

IAC valve 700

posted by  someone claiming to be fixit2002 on  Mon Apr 4 11:10 CST 2011 [RELATED]

What kind do you have? If you have the older three pin connector type you can pry up the tabs and take them apart. Turbos tend to pump oil vapor into the insides and they get gummed up. Be sure to scribe some marks on the two halves to get them back together correctly. There's a small plastic cone shaped brush spreader that comes off when you pull the armature out. It needs to be removed from the can and installed on the end of the armature before you put it back together. I've read here that the newer two connector pin types can't be dissassembled.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.