The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Which end is up? 700

Mystery solved! Sometimes, one can actually "see" a squeak...

I found that the steel plate on top of the rubber spring seat (the steel plate in which the strut bearing rides) was rubbing on the piston rod of the shock. In fact, the piston rod had rubbed a shiny spot on the steel plate, so I could "see" the squeak. My theory is that because I had the bump stops upside down, there was just enough movement of the plate to contact the piston rod. The bump stops should fit snugly within the rubber spring seat, wedged up against the steel plate. So, I enlarged the hole in the steel plate a bit (only about 1/16 in. using a 1-1/8 in. bit), and I installed the bump stops correctly this time.

What a joy it is to have a new and quiet front suspension!

Next is a new oil pan gasket, new power steering hoses, and reservoir. Looking forward to the big job of lifting the engine and dropping the cross member to replace the oil pan gasket.

--
Jim Nau '91 740 178K






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.