The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

front brake calipers wrongly assembled. 200

I have had an impossible time to keep brake pressure.I assumed that one or both replacement calipers were assembled incorrectly when re-manufacturing took place.I found one that had mis-matched punch marks.I replaced it with another.That was the front right.Now, when the system is bled fluid squirts out of the bottom brake line fitting at the caliper, even the nipples look fine.Fittings are snug.

I see a difference even though punch marks on left front caliper are the same.
The upper inside valve faces inward towards engine and the lower bleeder faces toward rear of the car.The right front is the opposite.
I cant understand why it leaks when brake pedal is depressed.You hear fluid squirting out and quite a bit in 3 or 4 pumps.All fittings are seated snugly.
Do I need to try another caliper.Ive been fooled by the punch marks?


Thanks to anyone in advance,
rexall






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.