The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

UUUGGHHH changed intake gasket wont idle!!!!!!!! 200

Ok today I changed my intake gasket FI orings and breather box.
Went to start her up after I finished and she idled fine a little lopey but better than before. Drove her around the block and parked her, I went back to start her up because I needed to go to the store she started up and slowly died! Idle was normal for a few seconds then she just started idling really low and died out. 5 starts after and she still keeps doing it. I checked all my vac lines and even replace a few while I had her all apart. When I replaced my breather box I noticed it did not fit very tight at the bottom oil line, the breather box I replaced my old one with was also not a tight fit either. I am pretty sure the intake it on pretty tight and I rechecked everything. I really hope someone can help I am really stumped I'm just sitting here in the garage trying to figure it out. HELP!
--
Dean 1991 240 wagon






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.