The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

power lock problem 200 1989

I just went through the same aggravation.I repaired and replaced 3 different central locking "rings".As soon as I plug the thing in inside the door,the locks would lock but not unlock.Drove me nuts.Finally I unplug the wireing inside the car,mine is a 92 240GL,pulled the harness out a little from the door jamb,rubber boot and fiddle with wires a bit.And the locks worked.The wires in the door were not cut or frayed.But I suspect where they 'bend'it caused an internal disconnect.I wrapped the wires with tape to make them strong put it back together,made sure the plug under the dash was not corroded and everything is now working the way it should.I would trace the harness from under the dash ,through the door and out to the plug.I was lazy,otherwise I would have cut the end plus off and run 3 new wires.More work but a better repair.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.