The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can this hi/lo relay be used to flash hi beams as well? 120-130

I installed this
http://www.davebarton.com/1307991headlightrelay.jpg
kind of relay years ago...I use it to switch between hi/lo using the grey wire from the turn indicator stalk. Can't remember how I wired it now but it works. Stalk wire (grey) is attached to the upper left spade in the link...I would like to add a flash high beams to this so I though I would just control a normal relay to the high beam lights, and control it with the same grey wire.....except it shorts/buzzes etc.
If I disconnect the grey wire from the hi/lo relay I can flash my highs, but if I try to have the grey wire control both relays at the same time no go....I figure it is something obvious but as I can't recall exactly the way the hi/lo relay works I need to think ...and that hurts...so if anyone has a simple painless solution....
--
Patrick, '68 220 (used to drive 240s)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.