The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

WIPER LINKAGE CREAKING & SQUAWKING 200 1981

posted by  81242DLB21FCA on  Sun Jul 24 09:51 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:26 CST 2014
[RELATED]

Zen of Volvo 240 Wiper Linkage:

http://www.jimjmorris.com/cvcoa/wipers.htm

The wiper shaft comes out of the mount/bushing from the inside but you have to remove the linkage and cable. I don't recommend doing it as I had a hell of a time getting it back together. The linkage comes apart by loosening the little cable locknut on the drivers side. Installing requires a small screw driver into the slot in the end of the cable while tightening the locknut. All this while sitting upside down with head under dash and between peddles.

Try lubricating the wiper shaft from outside after removing the wiper arm and rubber seal. The motor gears are plastic so don't stress them too much.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.